vises

boot tools BOOTFITTING TOOLS & AIDS
If your boots don't fit right or make your feet hurt, you're not gonna enjoy your time in the snow no matter how perfect everything else is. Here's a big selection of ski and snowboard boot fitting aids, tools, toasty heaters and dryers to keep your feet comfortable, warm and dry.

Bootfitting tips


Boot Tools

ski snowboard tuning Footbeds & Insole Shims
ski snowboard tuning Heel Lifts
ski snowboard tuning Heel Wedges
ski snowboard tuning Ankle L-Pads
ski snowboard tuning C-Pads
ski snowboard tuning Ankle Wrap Pads
ski snowboard tuning Narrowing Pads
ski snowboard tuning Tongue Pads
ski snowboard tuning Eliminator Tongue Shims
ski snowboard tuning Boot Fitting Foam
ski snowboard tuning Contact Cement
ski snowboard tuning Boot Shell Spreader
ski snowboard tuning Boot Deodorant
ski snowboard tuning Binding & Boot Lubricant
ski snowboard tuning Boot Booster Straps
ski snowboard tuning Boot Key
ski snowboard tuning Hotronic Footwarmers
ski snowboard tuning Reflective Heat Insoles
ski snowboard tuning Boot Covers
ski snowboard tuning Boot & Glove Dryers

ski snowboard tuning

footbeds snowflake SUPERFEET FOOTBEDS
Bootfitting is the art of marrying a soft flexible foot to a hard rigid shell...footbeds play a critical role in helping to make the foot more rigid in a supportive, comfortable way to help you achieve better balance and performance on your skis...as well in softer boots for snowboarding, skating, running, hiking, etc.

The footbeds that come in any new ski or snowboard boots aren't much to crow about... they might feel okay when they're brand new, but will soon compress and lose their support after short use. In a ski boot, this invariably leads to greater foot and ankle pain, with an accompanying loss of edge control. In snowboard boots, the fit gets sloppy and your heels lift. In nordic or in-line skating boots, the lateral support disappears and feet start cramping and fatiguing. This is a bummer after you've shelled out big bucks for specialized footgear...but other than coughing up another $150+ for custom orthotics, what can you do?

Superfeet footbeds are a good solution for many feet. Why? First, they better match the shape of the bottom of your foot to provide greater support and to help eliminate discomfort and numbness. Second, they help minimize inward rotation of the lower leg, which results in less knee strain and greater shin comfort. Third, they better stabilize the foot to reduce such common pronation problems as ankle pain, arch ache, toe pressure, black toenails and heel discomfort. In short, Superfeet footbeds provide greater support to enjoy the level of performance your footgear was designed to deliver.

We carry the blue Superfeet footbeds which we find best fit the majority of folks out there. They are designed around a low to medium arch height and are 1/4" thick in the forefoot.

Choose the size you need (mens sizes listed...ladies, please deduct 1 full size from these for your feet), then trim `em with scissors for an exact fit using your original boot insoles as a pattern.


Item #SFT-216   Superfeet Insoles, size 5.5-7: $32.95 pr 

Quantity:
Item #SFT-218   Superfeet Insoles, size 7-9: $32.95 pr 
Quantity:
Item #SFT-2110   Superfeet Insoles, size 9-11: $32.95 pr 
Quantity:
Item #SFT-2112   Superfeet Insoles, size 11.5-13: $32.95 pr 
Quantity:

ski snowboard tuning

footbeds BONTEX INSOLE SHIMS
These mildew-resistant shims are inserted under footbeds to remove excess roominess in a boot. Their hefty fiber composition provides additional insulation and they can be trimmed to fit any boot. Two thicknesses are offered.
1/16 inch Thick Shims
Item #SPK-S01   1/16 inch Insole Shims, size 5-7: $2.95 pr
Quantity:

Item #SPK-S02   1/16 inch Insole Shims, size 7-9: $2.95 pr
Quantity:

Item #SPK-S03   1/16 inch Insole Shims, size 9-11: $2.95 pr
Quantity:

Item #SPK-S04   1/16 inch Insole Shims, size 11-13: $2.95 pr
Quantity:



1/8 inch Thick Shims

Item #SPK-S11   1/8 inch Insole Shims, size 6-7: $3.95 pr
Quantity:

Item #SPK-S12   1/8 inch Insole Shims, size 8-9: $3.95 pr
Quantity:

Item #SPK-S13   1/8 inch Insole Shims, size 10-11: $3.95 pr
Quantity:

Item #SPK-S14   1/8 inch Insole Shims, size 12-13: $3.95 pr
Quantity:
ski snowboard tuning

heel lifts HEEL LIFTS
Heel lifts have many uses. They can increase forward lean by increasing your boot ramp angle, help stop heel lift, reposition the ankle bone, take pressure off the arch, decrease boot top tightness around the calf and more. They can be trimmed or modified to fit as necessary, and are offered in 3 different sizes. Small size creates 3/8" of lift, medium is 7/16", and large is 1/2".
Item #SPK-HLS   Heel Lifts Size 5-8: $3.95 pr
Quantity:

Item #SPK-HLM   Heel Lifts Size 8-10: $3.95 pr
Quantity:

Item #SPK-HLL   Heel Lifts Size 10+: $3.95 pr
Quantity:

ski snowboard tuning

wedges HEEL WEDGES
Although good footbeds are the best solution, you can slip wedges under your heels to correct for a foot that rolls to the inside (pronation) or outside (supination). Correcting pronation will make the foot seem shorter and narrower for less pinching in the boot. It will also aid in edging, slow down rotation causing shin bite, and cut down on arch cramps. They can also be used for other wedging, such as around an ankle bone, etc. All sizes offer 1/4" of lift on the thick side.
Item #SPK-HWS   Heel Wedges Size 5-8: $3.95 pr
Quantity:

Item #SPK-HWM   Heel Wedges Size 8-10: $3.95 pr
Quantity:

Item #SPK-HWL   Heel Wedges Size 10+: $3.95 pr
Quantity:

ski snowboard tuning

ankle pads ANKLE L-PADS
Use L-pads to fill the void between the Achilles tendon and ankle bone. They provide better security and heel hold-down. They are self-adhesive and can be sanded or trimmed to fit as necessary. Attach them to the outside of the boot liner.
Item #SPK-LP3 Ankle L-Pads: $3.95 pr
Quantity:

ski snowboard tuning

c pads C-PADS
These pads snug up the fit around your ankle bone. It's good for heel and ankle retention if the hindfoot is loose in a boot. These pads are self-adhesive and are attached to the outside of the boot liner.
Item #SPK-CPD3 C-Pads: $3.95 pr
Quantity:

ski snowboard tuning

wrap pads ANKLE WRAP PADS
Use this pad behind and around the ankle for snugging up the ankle area and creating a good heel pocket. They are self-adhesive to attach to the outside of the boot liner and can be sanded and trimmed for a precise fit.
Item #SPK-MWA Ankle Wrap Pads: $4.95 pr
Quantity:

ski snowboard tuning

narrow pads NARROWING PADS
Do you have narrow feet? If so, these pads are designed to narrow the boot for a more secure fit. They can be sanded and trimmed as necessary, and are self-adhesive to attach to the outside of your boot liner.
Item #KWI-188245 Narrowing Pads: $4.95 pr
Quantity:

ski snowboard tuning

tongue pads TONGUE PADS
No, don't use these puppies to check for sore tonsils...instead, stick 'em to the inside of boot tongues to protect against shin "bang" or to fill voids if the fit is too roomy there. They're felt-covered for comfortable shin contact with a self-adhesive backing on the other side.
Item #SPK-TPNL Tongue Pads: $2.95 pr
Quantity:

ski snowboard tuning

eliminator ELIMINATOR TONGUE SHIMS
Do you have thin calves or skinny ankles? Do you have to crank your upper boot buckles especially tight to make the upper cuff fit snugger...only to find the flex becomes uncomfortably stiff? It,s no secret that most boot fit and performance problems stem from oversized boots. The Eliminator is a large, semi-soft foam pad with a smooth inner face that,s molded to fit snugly behind your existing boot tongue. It easily attaches in seconds with supplied fasteners (or permanently with contact cement) and can help cure a myriad of ills. These include shin bite relief, greater grip in the heel pocket and elimination of instep pain from overbuckling...particularly in snowboard boots. It also reduces or eliminates excess room in upper boot cuffs. Two sizes are offered...small fits boots up to mens size 8 1/2, while the large is for mens size 9 and larger.
Item #MFT-ES   Eliminator Tongue Pads- Small: $22.95 pr
Quantity:

Item #MFT-EL    Eliminator Tongue Pads- Large: $22.95 pr
Quantity:

ski snowboard tuning

fitting foam BOOT FITTING FOAM SHEETS
Sometimes pre-cut pads don't do exactly what you need. We offer this 1/8" thick, firm-density, closed-cell neoprene foam that you can cut with scissors and/or sand to any desired shape. It's has a self-adhesive coating on one side, and is sold in approximately a 10"x10" squares.
Item #SPK-BFF8   Boot Fitting Foam:Currently Out of stock.
Quantity:
ski snowboard tuning

barge cement
BARGE CEMENT

Use this strong contact cement to glue heel wedges to an innersole, or boot fit pads to a boot liner. It sets up rapidly. Use with care...it's flammable and the fumes are pretty potent.  2 oz. tube.
Item #ADV-8425    Barge Cement:  $3.95
Quantity:

ski snowboard tuning

tongue  pads
BOOT SHELL SPREADER

This simple but powerful tool spreads even the stiffest ski boot shells wide open so you can easily remove or install boots liners, insole shims, boot fit aids, replace buckles or grind off shell material. It,s an indespensible part of any serious bootfitters workshop tool arsenal, plus it,s portable so you can pack it along for boot repairs or adjustments when on the road.

Item #SHP-165085 Boot Shell Spreader Tool: $145.95

Quantity:

ski snowboard tuning

boot juice
BOOT JUICE DEODORANT

Stamp out boot stink and mildew. Spray a dash of boot juice in those puppies every now and again to keep 'em smelling sweet as a daisy and keep creepy swamp growth at bay. Big 20 oz. pump spray can. Due to its flammable propellent, we can only ship this item to customers in the lower 48 U.S. states.
Item #SPK-BJ20   Boot Juice Deodorant:  $10.95
Quantity:

ski snowboard tuning


lubricant
BINDING & BOOT LUBRICANT
This is a spray lube that inhibits exterior icing and corrosion of bindings. It is also a temporary solution to some boot/binding friction problems. In addition, it helps keep snow and ice from sticking to boot soles, as well as ski and snowboard tops. Just lightly spray the surface and let dry. Comes in a 4oz (125ml) spray bottle.
Item #KWI-015122 Binding and Boot Lubricant: $7.95
Quantity:

ski snowboard tuning

booster  straps POWER BOOSTER STRAPS
These industrial strength, semi-elastic boot-top straps can give most skiers significantly better boot performance. They wrap around the back of your upper boot shell and the top of the boot tongue in front. When you cinch 'em snug, the tongues become virtually glued to your shins whether you find yourself centered, forward or in the back seat...providing constant foot-to-ski response. They make your skis feel more like an extension of your legs. Booster straps are sold by the pair and can also be permanently attached to the back of your boot shell with a pop-rivet or similar. Two versions are available. Most recreational folks prefer the Standard model (medium elasticity), while burly racer types go for the Pro model (stiffer elasticity).
Item #MFT-BOS    Booster straps- standard:   $24.95 pr
Quantity:

Item #MFT-PRO   Booster straps- pro:  $34.95 pr
Quantity:
ski snowboard tuning
   ski  ki
BOOT KEY
Have you ever struggled to close or open a tight boot buckle? This palm-sized tool slips over the end of a buckle latch and provides extra leverage to snap open or shut the buckle without even removing your gloves. It's light enough to carry in a pocket for use throughout the day, and doubles as a handy boot carrier as well.

Item #SKT-TOOL   Boot Buckle Key:   $6.95

Quantity:

ski snowboard tuning

footheaters

HOTRONIC FOOTWARMERS
When your feet are cold it’s hard to enjoy a good day on the slopes. Keep your tootsies toasty. Simply attach the heating elements to your existing footbeds and plug them into the battery packs. Battery packs attach easily to the back of boot shells using a metal clip…or with optional screw or strap mounting brackets. The M4 offers four heat settings powered by high capacity NiMH cells. The M4 will run 2.5 to 21 hours. If you have really cold feet the M4 will run a full day of skiing at heating level 3! Recharges in 3-hours or less. Additional battery packs are available. Hotronic offers a 3-year limited warranty.

Item #HOT-1043 Hotronic M4 Footwarmers:$199.95 pr

Quantity:


 

hotronics foot warmer batteryItem #HOT-143 Extra M4 Battery: $59.95ea

Quantity:

 

Item #HOT-147 Extra M3 Battery: $49.95ea

Quantity:



Optional Mounting Brackets
For more secure attachment: The Hot-1500 brackets require drilling a single hole in the back of each boot shell or Hot-1503 mounts the batteries to the front of your boot powerstraps to avoid possible impact when loading on chairlifts.

footheaters Item #HOT-1500 Optional Mounting Brackets: $7.95 pr

Quantity:





footheaters Item #HOT-1503   Optional Strap Brackets: $9.95 pr
Quantity:





footheaters Item #HOT-1240   Optional Cambrelle footbed covers: $6.95 pr
Quantity:








ski snowboard tuning
footheaters

REFLECTIVE HEAT INSOLES
Here's a simple step you can take to help keep feet warmer in ski or snowboard boots...as well as in other winter footwear. Slip these thin reflective insoles under your existing footbeds (or under the inner ski boot if you prefer), where they help reflect heat back up to your feet. Their ultrathin design won't affect boot fit, and they are easily trimmed with scissors to match the exact shape of your existing footbeds...from tiny "Barbie" size on up to huge "Shaquille" dimensions (well, size 15, anyway).

Item #DRY-DGTF Reflective Heat Insoles: $18.95 pr

Quantity:

ski snowboard tuning

footheaters BOOT GLOVES
If you suffer from cold feet, slip a pair of these neoprene Bootgloves over your ski boot shells. They help insulate your toes and forefoot, but won't compromise boot fit or interfere with safe binding operation. Simply slip 'em over the front of each boot and snug 'em up with the adjustable strap that runs around the back. For optimal efficiency, cut out the neoprene material to expose your lower boot buckles...this can easily be done without harm to the Bootgloves. Two sizes offered...medium fits size 6-11, and large fits size 11.5-15. Their black color also helps maximize solar heat absorption.

Item #DRY-BAM Bootgloves- medium size: $27.95pr

Quantity:

Item #DRY-BAL   Bootgloves- large size: $27.95 pr

Quantity:
ski snowboard tuning

NEW! DRY STIX
These affordable dryers use convection heat to drive moisture from your boots overnight and are great for warming-up stiff boots on frigid winter mornings. They take a bit longer than forced-air models but are silent so you can rest up for that epic powder day! Highly portable, each stick measures just 5" long and 1" in diameter.
They run on standard 120v outlets.
boot dryer sticks
Item #DRY-DG3   Dry Stix:   $27.95 pr

Quantity:

 

ski snowboard tuning

NEW! TURBO CIRCULATOR
These sleek boot dryers combine convection heat with forced air to dry and warm your boots quickly and efficiently. Just slip them in your boots and let the quiet fan do all the work, no need to worry about overheating because the warm air is constantly exiting the boot taking moisture with it. The compact size is perfect for travel and includes options for 115 volt household plugs or 12 volt DC, You can use these babies to warm your boots on the way to the hill! boot dryer air and heat

Item #DRY-DG00301   Turbo Circulator:   $39.95 pr

Quantity:

 

ski snowboard tuning

footheaters

DRYFAST BOOT DRYER
This is a versatile battery and electrical outlet-powered boot dryer you can use virtually anywhere...in a ski locker, your auto, or anywhere. It circulates room-temperature air using an integrated fan that can be powered by 4 "C" battery cells (not included), and will run continuously up to 100 hours. It operates fairly quietly and will accommodate one pair of ski boots, snowboard boots or other footwear. It will also run on 12 volt DC (comes with a cigarette lighter-type fitting), as well as 115 volt AC (includes adapter).

Item #DRY-DG7    Dryfast Boot Dryer:  Regularly $35.95 pr Sale $25.95

Quantity:

ski snowboard tuning

compact dryer

COMPACT BOOT & GLOVE DRYER

This small but efficient pair of forced-air dryers circulates 3 cubic feet of air per minute through boots and gloves to dry them in about 1-2 hours. This rates varies somewhat depending on how warm the air temperature is and how wet the gear is...so for fastest results, operate them in a heated space. Unlike some dryers with heating elements, our model can't overheat boots and cause any damage to boot shells, liners, or footbeds. They are also compact enough to stow inside your boots for safe transport or storage. 110 volts.

Item #DRY-DG5   Compact Boot Dryer:   Regularly $64.95 pr Sale $49.95

Quantity:



ski snowboard tuning

thermonator THERMANATOR FAMILY DRYERS
These quiet and efficient dryers accommodate multiple pairs of boots and gloves for your family, club, school or team members. Simply slide boots and gloves over the metal loops which heat up to 100 degrees F. (body temperature). No noisy fans or blowers are required, and your gear dries in 3 - 6 hours depending on how damp it originally was. These sturdy freestanding metal dryers can be placed on your floor, or mounted to an interior wall. The 2-pair model needs 12" x 27" of floorspace, and the 4-pair model needs 12" x 52". Both models run on 110 volts.


Item #DRY-T2 Thermanator 2-Pair Dryer: $89.95
Quantity:

*9 lbs...Extra shipping charges may apply to this item.


Item #DRY-T4 Thermanator 4-Pair Dryer: Regularly$197.95 Sale! $149.95

Quantity:


ski snowboard tuning

thermonator

KWIK COMMERCIAL BOOT & GLOVE DRYERS
These commercial-grade dryers are designed to dry wet gear in the time it takes to eat lunch (most boots and gloves require only 20 to 30 minutes). They feature a built-in timer (with 60-minute cycle), self-lubricating fan motor that is extremely quiet and durable, and a two-way heat switch (250 or 375 watts) that allows you to control drying speed and temperature. Maximum generated heat is 135*F. These dryers are constructed with sturdy 14-gauge powder-coated steel that can be painted to match your wall or residence, mount on a 16” wall stud center, and can be hard-wired or plugged into an existing wall plug. The 2-pair dryer measures 41” high, 17.5” wide and 13” deep, while the 4-pair dryer measures 71” high, 17.5” wide and 13” deep. Both models run on 110 volts.

Item #KWI-102 Commercial 2-Pair Dryer: $699.95

Quantity:

*70 lbs...Extra shipping charges may apply to this item.


Item #KWI-104 Commercial 4-Pair Dryer: $799.95

Quantity:
*80 lbs...Extra shipping charges may apply to this item.


ski snowboard tuning


this snowflake denotes a good basic starter tool

Click here to view your shopping cart.

Catalog Contents
Request a Catalog
Tognar Toolworks Home Page

All contents ©2007 Tognar Toolworks

Valid HTML 4.0 Transitional