null
Toggle menu
1-800-299-9904
  • Ski Binding Cant Strip

    • Ski Binding Cant Strip

    Cant Company

    $15.95 - $16.00
    (30 reviews) Write a Review
    SKU:
    CCO CS0
    Adding to cart… category.add_cart_announcement

    Product Description

    Not for use with Binding Freedom Inserts.

    • We offer plastic cant strips for your boot/ski alignment needs.
    • Each cant strip is 2.25" (58mm) wide and 19.5" (50cm) long...sufficient for one binding plate (or toe and heelpiece).
    • Always trim and drill the cant strip to match your plate or binding patterns.
    • Make sure your binding screws are long enough to accommodate the extra cant thickness (especially on cants greater than 2 degrees).
    • If not, check at your local ski shop for longer screws. Each degree of cant creates about 1.5mm of lift.
    • Available in .5, 1, 1.5, 2, 2.5, and 3 degrees.
    • Cant strips are sold individually.

    Cant Strip Thickness (low side to high side) to aid in screw length determination.

    .5°   = 1.0 to 1.53mm
    1°    = .60 to 1.56mm
    1.5° = 1.0 to 2.31mm
    2°    = 1.3 to 3.17mm
    2.5° = .80 to 3.30mm
    3°    = .95 to 3.80mm

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    30 Reviews Hide Reviews Show Reviews

    • 5
      Canting shim

      Posted by Russ on Mar 18, 2024

      This was my second shim. I started with 2 degree shim for my bowed left leg. I have been doing yoga and strengthening exercises which has brought my leg closer to alignment so switch to a 1 degree shim. Don't know any other place to get shims. Customer service is great.

    • 5
      Ski binding cant strip 2.5

      Posted by Peter Almstrom on Jan 10, 2024

      Product works perfectly, solved my bow leg problem and makes it possible to use hybrid boots without having to remake the boots. Good value for money!

    • 5
      Cant strip 2.5 degrees

      Posted by Peter on Oct 14, 2023

      Mounted beneath my Salomon Shift 13 to adjust for my bow legs. Haven’t tried on snow yet, but the idea is to flatten the skis against the snow when standing in my natural position, without having to customize my hybrid boots. The plastic strips were easy to cut and mount, Great product.

    • 5
      cant strips

      Posted by Charlie on Apr 22, 2023

      used strips under cross country ski bindings to help level ski to snow interaction. Easy to trim; didn't need longer screws. Would work for alpine but better there to modify the boot.

    • 5
      Cant Strip

      Posted by Russ on Jan 23, 2023

      Works great for my left leg stance problem. Customer service is fast and friendly.

    • 1
      binding cant

      Posted by Peter A Gallant on Jan 07, 2023

      These are too narrow for modern ski bindings. Over priced. Had to make my own. Don't buy!

    • 3
      Ordered two 5 degree and received two 3 degree cants

      Posted by Don Roblin on Nov 29, 2022

      Pleased with them but sizing was wrong and with duty etc. just left it. Last year's I got correct 2.5 degree order correctly.

    • 5
      TOGNAR SKI BINDING CANT STRIP

      Posted by Daniel Busch on Jun 26, 2022

      These cant strips are the best. Easy to trim and fit with simple tools. Try cross country skate skiing with bowed legs - impossible to push off on an inside edge. I thought my days were over when Alpina dropped the cantable cuff boots. I'm back on snow now. Thanks!

    • 5
      SKI BINDING CANT STRIPS

      Posted by John Carlson on Apr 27, 2022

      I purchased two cant strips for a new pair of cross country skis. All my downhill skis are canted, but I had a little trouble trying to find someone who has canted cross country skis before. I was using a cross country binding (Rottefella Backcountry binding) which is a little over 16 inches long for my boots. These cant strips were perfect because they are 19.5 inches long, so you could easily cut them to 16.5 inches. The width of 2.25 inches was perfect for these Rottefella bindings. So yes... I was very pleased with this purchase.