Default Currency
Australia
New Zealand
European Union
Canadian Dollar
Product Description
These sheets of sintered p-tex are glued (not melted) to repair very large gouges or damaged areas.
- The material is 4.25" (110mm) wide and 1mm thick.
- They are sold in 12-inch increments in any length (e.g., if you order 6-feet, you'll get an uncut 6-foot length).
- The rough side is the side that is glued down (the epoxy adheres better to the rough texture).
How To Use
- First, cut and peel out the damaged base material using with a base template and repair knife.
- Cut a new patch from these p-tex sheets (rough side down)
- Glue into place on the ski or snowboard base with epoxy.
- Clamp the patch firmly (not overly tight or the epoxy will be squeezed out) using small c-clamps and flat wood or metal plates to distribute pressure evenly over the patch.
- Allow adequate time for the epoxy to dry.
- After removing clamps and plates, re-prep and hot wax the base as usual.
Product Videos
Custom Field
Product Reviews
6 Reviews Hide Reviews Show Reviews
-
Base patch material
Tricky to use but the results are good, requires very sharp cutting tools to trim properly.
-
P-Tex
Works great, could have saved myself a lot of time and trouble going to various ski shops trying without success trying to get someone to fix my skis. Thanks a bunch!
-
Ptex
Thanks for the great product
-
P-TEX SKI BASE PATCH MATERIAL
Top notch material for base repair. It worked great
-
Proper base material
As per the title, this is the genuine article. The minute you handle it, you can tell the difference between hot melt and this. For big core shots, this is a must if you want a permanent repair.
-
50 poorly spent
I gave my ski to my area ski shop for a core shot base repair. 50 dollars later, I got 8 days of skiing out of it. My repair with your base material is still going strong.
