Product Description
If you're remounting bindings, or mounting new bindings on old skis, use these plastic hole plugs to fill old binding screw holes you won't be reusing They'll keep out water that can otherwise freeze, expand and possibly create structural damage. Just squirt in a dab of binding or similar waterproof glue, and tap one of these plugs into the empty hole with a hammer. When the glue dries, carefully trim off any protruding plug material with a chisel or razor blade.
- Available in a rainbow of colors.
- 4.7mm diameter tapering to a point.
- 10mm long
- Sold as a bag of 20 plugs.
Tips:
- If your holes are really stripped out you might want to pick up some larger diameter wood plugs.
- Give the plastic plugs one good whack with the hammer to set them, they will mushroom out most likely, that is ok, just trim off the excess.
- If you need to reuse a plugged hole in the future, no problem, just drill right through the plug with the appropriate drill bit.
Product Videos
Custom Field
Product Reviews
18 Reviews Hide Reviews Show Reviews
-
Plugs
Just as described
-
WINTERSTEIGER PLASTIC SKI BINDING HOLE PLUGS
work great, easy to trim excess
-
i always buy these plugs fro Tognar
the shipping is so fast!
-
Plastic Ski Binding Hole Plugs
These work great.
-
Did the job
Did exactly what they're supposed to do. 6 out of 5.
-
Binding hole plugs
Perfect fit - these hole plugs are a must of reseting bindings and or changing bindings
-
Hole plugs
Work as designed, nice to be able purchase small quantities instead of bulk quantities
-
Ski binding hole plogs
I used these plugs on skis that I stripped to use to make adirondack ski chairs. They can be heated to fully plug holes and are easily trimmed flush with a razor. Fast delivery service totally satisfied.
-
Works well
Was able to seal up screw holes from old bindings by hammering them in until they wouldn't go any more and then trimming off the excess.