null
Toggle menu
1-800-299-9904
  • Ski Binding Cant Strip

    • Ski Binding Cant Strip

    Cant Company

    $15.95 - $16.00
    (31 reviews) Write a Review
    SKU:
    CCO CS0
    Adding to cart… category.add_cart_announcement

    Product Description

    Not for use with Binding Freedom Inserts.

    • We offer plastic cant strips for your boot/ski alignment needs.
    • Each cant strip is 2.25" (58mm) wide and 19.5" (50cm) long...sufficient for one binding plate (or toe and heelpiece).
    • Always trim and drill the cant strip to match your plate or binding patterns.
    • Make sure your binding screws are long enough to accommodate the extra cant thickness (especially on cants greater than 2 degrees).
    • If not, check at your local ski shop for longer screws. Each degree of cant creates about 1.5mm of lift.
    • Available in .5, 1, 1.5, 2, 2.5, and 3 degrees.
    • Cant strips are sold individually.

    Cant Strip Thickness (low side to high side) to aid in screw length determination.

    .5°   = 1.0 to 1.53mm
    1°    = .60 to 1.56mm
    1.5° = 1.0 to 2.31mm
    2°    = 1.3 to 3.17mm
    2.5° = .80 to 3.30mm
    3°    = .95 to 3.80mm

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    31 Reviews Hide Reviews Show Reviews

    • 5
      Cant strip

      Posted by Chris on Jan 03, 2019

      If all the ways to use/mount them I ended up putting them under my footbed. Only one that would work with my skis and boots. Still works though. The hind foot is what really matters and they are the right width there.

    • 5
      Full length (50cm) canting strips that can be cut and fitted between ski and binding for bettter alignment

      Posted by Louis on Jun 10, 2018

      With international postage they were better value than competitors offer.

    • 5
      Works As It Should

      Posted by DB Missoula on Jan 31, 2018

      I bought these canting strips to get my skis to naturally run flatter as I develop more supination from deterioration of the medial meniscus and arthritis on the medial sides of each knee. I used to canting strips for slalom ski racing and I much prefer adjusting the issues with binding cants rather than boot modifications. I've had to do a bit of both, however, to get both a flat ski and a snug, comfortable boot.

    • 5
      Cants work great

      Posted by Alan Gillette on Dec 26, 2017

      I've been using these cants for years. Simple but effective.

    • 5
      Good cant strip!

      Posted by JAMES MALACHOWSKI on Aug 30, 2017

      Was able to receive hard to find cant strips. Glad tognar carries them.

    • 5
      Wish I knew about these years ago!

      Posted by Steve the Tele Skier on Jun 11, 2015

      I am very bowlegged which is a curse for skiing because it makes you outside edge. A PSIA telemark instructor recommended that I cant my bindings. Placing these cants between the bindings and skis does wonders to help my skiing. I wish that I knew about these 25 years ago.

    • 4
      Cant Strip

      Posted by Unknown on Feb 08, 2015

      Good product. It works. Its a piece of plastic.

    • 4
      excellent - hard to find otherwise

      Posted by fcm_2008 on Jan 05, 2015

      Great to have a provider. Everyone around here has a million reasons why they can't provide Cants.

    • 4
      good product for cant ski boot

      Posted by Riccardo on Jun 02, 2014

      good product, i use for to set the cant ski boot.